High Quality Equipment of Processing Insulating Glass, Low E Glass Washing Machine, Double Glazing Glass Washing Machine Suppliers in China

Home > Products > Steel Materials > Steel materials vertical glass washing machine

Steel materials vertical glass washing machine

  • Steel materials vertical glass washing machine
  • Steel materials vertical glass washing machine

Steel materials vertical glass washing machine

    Payment Type: L/C,T/T,D/P
    Terms of Trade: FOB,CFR,CIF
    Min. Order: 1 Set/Sets
    Delivery Time: 30 Days
    Packaging: container
    Brand: Lijiang
    Transportation: Ocean,Land,Air
    Place of Origin: shandong,China
    Certificate: CE
    HS Code: 8464901900
    Port: Qingdao

Basic Info

Model No.: LJWBQJ2500

Product Description

Steel Materials vertical glass washing machine

Vertical glass washing machine is key equipment of manufacturer and processing insulating glass industries. Glass washing machine can washing 3-19mm thickness and max width2500mm flat glass.

During the whole washing process,Glass washing machine works automatically, and no need manual operation..Vertical glass washing machine is key equipment of manufacturing and processing insulating glass in architecture, building material and decoration industries.

Glass washing machine mainly consists of washing section, drying section,drive system, machine frame, tank, blower, electric control system and other parts.

Glass washing machine is used for flat glass, especially for glass before coating.
Glass washing machine mainly consists of loading section, washing section, drying section and unloading section.

1, Loading part

To Avoid the low-e Glass put inverse side and Leave wheel marks or scratch low-e Coating We use coating inspection -metal film conductive (other company use Photoelectric detection, hard to recognize for higher transparent film coating)

(Nylon and Polyurethane + metal column)

2, Washing and Drying part

* Three pairs soft brushes can wash low-e glass and normal glass , the diameter is less than 0.1mm.
* Materials are stainless steel.
* Wind knife is float design , it always keep the right and suitable distance 3mm between the glass surface and wind knife (Same like LISEC structure(Remark: 3mm is the best drying distance)

There is a universal joint device.When the glass thickness was changed, the air knife can move forward and backward to adjust the distance, so that the relative distance between the wind knife and the glass is constant, so as to avoid the damage to the glass film due to the change of the glass thickness.

* The front and back side squeeze-wheel are all actively move and convey. No mater the glass size is big/ small/thick/thin (8mm) , it all guarantee the glass pass through smoothly.

3, Detecting part
4, Assembly part

Built-in beam lifting structure (double beams)
Convenient for detect and wipe the glass

5 Adjustable Pressing Parts

1, There have stress after welding in the Pressing frame ,So out-of -shape problems is inescapable after using some time(machine can not press DGU properly, evenly and tightly )
that is not good for IGU quality, any glass project can not accept these products

For this uneven inescapable issue, here are our solution :

a.we all do the aging treatment , it’s the stress-remove by vibration failure device.

b.The important is We design the 74 points on the backbord, if there have any out-of shape problems we can adjust easily at any time.

Technical data

2000*2500 Max.glass size

Normal glass

2000*2500mm

Glass with argon gas

2000*2500mm

2500*3500 Max glass size

Normal glass

2500*3500mm

Glass with argon gas

2500*3200mm

Min.glass size

280*450mm

Glass thickness

3-15mm

Insulating glass thickness

50mm(special made for 60mm need special notice)

Glass washing speed

Summer 8-10m/min winter 6-7m/min

Glass conveyor speed:

45m/min

Washing brushes

3 pairs

Water supply:

Water consumption:0.5t/h conductivity:≤50μs/cm6-7

Air supply

Flow: 0.8m/min

Air pressure

≥0.8MPa

Total power

3P380V 50HZ 34KW

Dimension

23500*3500*3700mm

glass washing machine



JINAN KATION TRADING CO.,LTD

  • 1
  • 2
  • 3
  • 4
  • 5
 Kation-Tech founded in 2009, specializes in R&D, production and sales of Insulating glass machinery and related auxiliary equipment for the glass deep processing industry and the door and window construction industry. Has the professional processing basis of insulating glass machinery, aluminum-plastic windows & doors machinery and the related auxiliary materials, etc. In this way, we provide the most comprehensive glass processing solution and windows & doors solution for domestic and foreign customers well. Until 2019, we exported glass machines and materials to America, South America, Europe, the Middle East, India and so on, nearly 30 countries and regions. We have established a perfect international business relationship with 10 powerful agents and made an endeavor together to build a famous international brand to the world. Kation-Tech, with craftsmanship, profession and honesty, wins the future with you together!

Company Info

  • Company Name: JINAN KATION TRADING CO.,LTD
  • Representative: jichangpeng
  • Product/Service: Insulating Glass Production Line , Spacer Bending Machine , Insulating Glass Sealing Robot , Glass Lifter , Glass Cutting Machine , Glass Washing Machine
  • Capital (Million US $): 3000000RMB
  • Year Established: 2009
  • Total Annual Sales Volume (Million US $): US$2.5 Million - US$5 Million
  • Export Percentage: 41% - 50%
  • Total Annual Purchase Volume (Million US $): Below US$1 Million
  • No. of Production Lines: 3
  • No. of R&D Staff: 11 -20 People
  • No. of QC Staff: 5 -10 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 10,000-30,000 square meters
  • Factory Location: Qihe
  • Contact Person: Ms. June
  • Tel: 86-0531-18678875966
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters